General Abatement Contractor
Colorado CDPHE — GAC No. 26365 · valid through Aug 31, 2027
Specialized asbestos mastic removal in Sheridan. We safely remove black mastic and flooring adhesives using CDPHE-compliant methods. Get a free quote today.
Field Documentation
Watch our certified teams execute compliant containment, extraction, and restoration work on active projects. This video demonstrates the professionalism and documentation rigor that backs every scope.
We work with all major insurance carriers
Certifications
These are the trust details that continue to matter in procurement reviews, environmental documentation, and regulated project handoffs.
Process
Inspect. Plan. Contain. Remediate. Verify. You get clear steps and documented work — every time.
Review site conditions and any independent assessment findings; agree the contractor scope.
Containment design, disposal pathway, regulator notifications.
Negative-air containment with documented entry/exit protocols.
Certified crews execute under continuous daily documentation.
Final cleanup and project records; clarify separate inspection, testing and clearance responsibilities.
Trust Signals
DUNS
117517457
CAGE CODE
62FR3
EPA Lead-Safe Certification No.
NAT-F222667
Asbestos Mastic Removal
Black mastic — the dark, tar-like adhesive found beneath vinyl and asphalt floor tiles — is one of the most common asbestos-containing materials in Sheridan homes and commercial buildings constructed before the mid-1980s. When left undisturbed, mastic poses minimal immediate risk. However, any renovation, demolition, or flooring replacement project that disturbs this adhesive can release microscopic asbestos fibers into the air, creating serious inhalation hazards for occupants and workers alike.
Atlas Contracting & Environmental Solutions specializes in the safe identification, containment, and removal of asbestos-containing mastic from residential and commercial properties across the Sheridan metropolitan area. Our crews hold current CDPHE certifications and follow Colorado Department of Public Health and Environment Regulation No. 8 protocols on every project, ensuring that your property meets all state and federal compliance requirements before, during, and after the remediation process.
Unlike general contractors who may treat mastic removal as a simple scraping job, our technicians understand that asbestos flooring adhesive requires specialized handling at every stage. From initial sampling and laboratory analysis through final air clearance testing, we maintain an unbroken chain of custody and documentation that protects both your health and your legal standing.
01
Our inspectors identify asbestos-containing black mastic commonly found under 9×9 and 12×12 floor tiles using polarized light microscopy and bulk sampling methods mandated by the EPA. We document every finding with photographic evidence and laboratory chain-of-custody reports before any work begins.
02
We deploy specialized chemical solvents or mechanical grinding equipment paired with HEPA filtration systems to ensure zero fiber release during the removal process. Every tool and vacuum unit is tested and calibrated to capture particles down to 0.3 microns in diameter.
03
Before any mastic is disturbed, our team constructs a full negative-pressure containment enclosure using polyethylene sheeting and HEPA-filtered air machines. This barrier system protects your indoor air quality and prevents cross-contamination to adjacent rooms or HVAC systems.
04
All hazardous adhesive waste is double-bagged in labeled 6-mil polyethylene bags, transported using licensed haulers, and disposed of at certified Colorado hazardous waste facilities. We provide complete waste manifests and disposal receipts for your records.
Our Process
Every asbestos mastic removal project follows a rigorous four-phase protocol designed to protect occupant health, maintain regulatory compliance, and leave your subfloors ready for new flooring installation.
Our certified inspector arrives on-site to conduct a thorough visual assessment of all flooring surfaces. We collect bulk samples of suspect mastic and tile materials using AHERA-approved sampling protocols. Samples are sent to an accredited NVLAP laboratory for polarized light microscopy (PLM) analysis. Results are typically returned within 24 to 48 hours. If asbestos is confirmed at concentrations above one percent, we classify the material and develop a detailed scope of work and project-specific remediation plan tailored to your property layout and timeline requirements.
Before disturbing any mastic, our crew establishes a regulated work area using 6-mil polyethylene sheeting, negative-pressure HEPA air filtration units, and critical barriers at all penetrations. We apply EPA-approved amended water and wetting agents to keep the mastic in a non-friable, saturated state throughout the removal process. This step is essential to preventing airborne fiber release and is continuously monitored using real-time air sampling equipment positioned inside and outside the containment zone.
Using a combination of chemical strippers, low-RPM floor grinders with integrated HEPA dust shrouds, and wet-scraping hand tools, our technicians methodically remove all mastic residue from the concrete substrate. We pay particular attention to control joints, perimeter edges, and areas where mastic has bonded deeply into porous concrete. Once the adhesive is removed, we clean and profile the subfloor surface to ensure it meets manufacturer specifications for new flooring adhesive bonding — whether you plan to install tile, hardwood, LVP, or commercial-grade epoxy coatings.
After all mastic has been removed and the work area has been thoroughly cleaned using HEPA vacuums and wet-wiping procedures, an independent third-party air monitoring firm conducts final clearance testing. Aggressive air sampling — using fans, leaf blowers, and simulated occupancy conditions — confirms that airborne fiber concentrations fall below the EPA clearance threshold of 0.01 fibers per cubic centimeter. Only after passing clearance do we dismantle containment and release the space for re-occupancy and new flooring installation. You receive a complete project file including lab reports, waste manifests, air monitoring results, and a certificate of completion.
Black mastic was the industry-standard flooring adhesive used to install vinyl asbestos tile (VAT), asphalt tile, and sheet vinyl in residential and commercial buildings from the 1920s through the early 1980s. In the Sheridan area, many homes built during the post-war suburban expansion and commercial buildings from the same era contain this adhesive beneath their original or even replacement flooring. The mastic itself often contains chrysotile asbestos fibers at concentrations ranging from two to ten percent.
The critical distinction that property owners must understand is the difference between non-friable and friable states. In its original undisturbed condition, black mastic is considered non-friable — it cannot be crumbled, pulverized, or reduced to powder by hand pressure. However, the moment anyone attempts to sand, grind, scrape, or chemically strip this material without proper containment and wet methods, it can transition to a friable state, releasing asbestos fibers that remain airborne for hours and can penetrate deep into the lung tissue of anyone in the vicinity.
This is why Colorado law requires that all asbestos-containing mastic removal be performed by CDPHE-certified abatement contractors operating under Regulation No. 8. Atlas holds current certifications and carries the specialized liability insurance required for this category of environmental work. Our EPA Lead-Safe Certification (No. NAT-F222667) and CAGE Code 62FR3 further demonstrate our commitment to maintaining the highest standards in hazardous materials handling.
If you are removing old tile to install new flooring, the mastic beneath must be tested and — if positive — removed by a certified contractor before new adhesives or underlayment can be applied.
Kitchen and bathroom renovations, commercial tenant improvements, and any project that involves cutting into or removing flooring surfaces may expose asbestos mastic and trigger CDPHE notification requirements.
Colorado requires a thorough asbestos survey before demolition permits are issued. Black mastic is one of the most frequently identified materials during these inspections, and its presence will halt demolition until proper abatement is completed.
Flooding or pipe leaks that saturate old tile floors can compromise the bond between tile and mastic, creating conditions where the adhesive may become friable during cleanup. Insurance adjusters often require testing before authorizing restoration work.
Some contractors may suggest encapsulating asbestos mastic — sealing it in place with a specialized coating rather than removing it. While encapsulation can be a legitimate short-term solution in certain limited scenarios, Atlas recommends full removal for most residential and commercial projects in Sheridan for several important reasons.
Our project managers will evaluate your specific situation — including the condition of the existing mastic, the scope of your renovation, and your timeline — and provide an honest recommendation on whether encapsulation or full removal is the most appropriate and cost-effective approach for your property.
Recent residential and commercial mastic remediation work across the Sheridan area.

Excavation equipment and staged rebar during an exterior structural demolition and site clearing project.

Atlas Contracting truck positioned at a commercial demolition site before exterior structural work begins.

A boarded commercial structure prepared for controlled demolition and site safety work.

Crew members removing exterior hardscape materials during structural demolition preparation.

Roll-off container and support truck staged for debris handling during an active demolition project.

Excavator working alongside roll-off containers as the structure is dismantled under controlled site conditions.
Client Feedback
Trusted by Sheridan homeowners and commercial property managers for safe, compliant asbestos remediation.
Brian Haugh
2 months ago
Great crew and fast response
georgina Cordero
7 months ago
Steve and his crew, along with Cassandra were amazing. Steve put me at ease with my situation, he took care of everything. They showed up and worked and did an excellent job.
theresa haskin
11 months ago
We had a roof leak in our kitchen caused by a roofer. Rob came out right away and assessed the issue and worked with myself and the roofer. That day he had made a plan for how the job would go, and began setting up equipment to keep my family safe. He walked me through every step of how the job would go and kept my husband and I informed throughout the process. He made sure that the toddler and newborn in my home would be safe throughout the entire demo process. I cannot recommend this company enough.
Doug
11 months ago
This is an honest place. There are so many disreputable companies out there in this industry, but Atlas is not one of them. Quick work, proper abatement to prevent contamination, and friendly service all come with the fairly priced Atlas contract. Nobody wants to have this work done because it usually means things have gone sideways in your home. That said, if you do, call Atlas Contracting and Environmental Solutions; the company is ACES!!!
Jacob Martin
11 months ago
Wonderful experience working with Steve and his knowledgeable and skilled team. 10/10
Rebecca Love
1 year ago
Fast to set up, done promptly and tidy afterwards. Thanks
Common questions about black mastic identification, removal, costs, and compliance in Sheridan, CO.
Non-friable unless sanded or ground Health risks if fibers become airborne Safe when managed by professionals
Chemical softening agents HEPA-shrouded floor grinders Wet-scraping methods
Encapsulation vs removal Risk of future contamination Manufacturer requirements for new flooring glues
Square footage pricing Complexity of the adhesive Inclusion of floor tile removal
CDPHE Regulation No. 8 requirements Notification thresholds for residential vs commercial
Typical 1-2 day turnaround for residential rooms Drying time for solvents
Surface preparation Etching vs cleaning Suitability for new adhesives
Age of building Visual indicators Testing as the only definitive proof
Still have questions?
We're here to help you find the answers.
Conveniently located for Sheridan, CO customers
7:00 AM–8:00 PM, seven days a week
Emergency dispatch is available after hours for urgent loss events.
Get a detailed scope of work and transparent pricing from our certified environmental team. Call (303) 241-1938 or request a quote online.
Why Atlas
Single-source environmental contractor with regulator-grade documentation, fast mobilization, and a Service-Disabled Veteran-Owned Small Business (SDVOSB) commitment to doing the work right the first time.
Atlas operates with the discipline, accountability, and follow-through you expect from a veteran-led organization.
Colorado CDPHE General Abatement Contractor (GAC No. 26365), certified meth lab cleanup contractor, and EPA Lead-Safe certified — credentials owners verify first.
Loss events do not wait for business hours. Crews mobilize fast across the Front Range to stabilize the property and start the documented scope immediately.
Photographed scope, daily progress logs, third-party clearance where required, and a project packet your insurer or inspector can verify.
Abatement, demolition, water and fire restoration, and reconstruction coordination — handled by one accountable contractor instead of three vendors.
We work with every major Colorado carrier and communicate directly with adjusters, GCs, and facility managers so the project moves without friction.
Insurance Partners
Atlas works with every major insurance carrier in Colorado to streamline your abatement, remediation, and restoration claims. We document scope, photograph progress, and coordinate directly with adjusters so the loss event moves to closure without bouncing between vendors.
15+
Major carriers worked
24/7
Adjuster coordination
Carriers we coordinate with
Don't see your carrier? We coordinate with most additional carriers on request — call to confirm.
10% off every Atlas project, every time.
Atlas extends a standing 10% discount to active and retired military, veterans, police, fire, and EMS personnel. As a Service-Disabled Veteran-Owned Small Business (SDVOSB), supporting those who serve is part of our charter.
Mention the discount when you contact us. Cannot be combined with other promotional offers.
Discount
10%
Off
Areas We Serve
Atlas mobilizes across the Front Range. Whether asbestos, lead, meth, or storm/water response, our certified crews arrive quickly to minimize risk and restore your property safely.